SIMPLIFIED Flange, 2.5" / T31 V-Band MILD STEEL (3.10" OD flange, Grooved for 2.5" OD Tube)
Sleeve style (not bolt-on) - Diverter Valve Block Off for 2.0T FSI Turbo Golf/Jetta/GTI Audi A3
Snap Ring Internal Type C-Clip for HKS bov
Spacer Ring for TiAL Manifold VB Entry (GT28/GT30/GT35)
Special actuator - Garrett P/N: 433489-12
Special Flanged Locknut 8mm (1.25 pitch)
Special Turbine Housing Clamp and Bolt Kit - For Tial Stainless Housing GT28/GT30/GT35
SR Wastegate Actuator & Bracket (Greddy Skyline & RX8 Replacement)
Stainless 2 bolt Flange, Bottom of Downpipe, on Fiat 500 Abarth
Stainless 4" V-band FLANGE (DOWNPIPE SIDE) for T4 Flanged Turbine Housing on GT42/GTX42 GT45/GTX45
Stainless DOWNPIPE Flange and Clamp set 3" GT V-band (protruded lip at ID) 3.55" / 90mm OD / 78mm Recessed lip
Stainless DOWNPIPE Flange and Clamp set 3" GT V-band (w/protruded lip at ID) 3.55" / 90mm OD / 81mm Recessed lip
Stainless Dumptube, Flanged/Welded for 44mm W/G Exit on EVO8 Bolt-on Turbo Kit
Stainless FLANGE, Turbine inlet (MANIFOLD SIDE) for TiAL V-Band Housing on GT55 / GTX55
Stainless FLANGE, Turbine outlet (DOWNPIPE SIDE) for TiAL V-Band Hsg on GT55 / GTX55 "NOT FOR SFI HS"
Stainless Heatshield for Scion tC Turbo Applications
Stainless MANIFOLD Flange and Clamp Borg Warner EFR Turbos 6258, 6758, 7163, 7064, 7670 8374 9180
Stainless Manifold Flange and Clamp set (1 each) for Garrett Undivided V-band Entry Housing
Stainless MANIFOLD SIDE Flange and Clamp set (1 each) for Garrett Undivided V-band Entry Housing
Stainless MANIFOLD SIDE FLANGE For Garrett UNDIVIDED V-Band Housing GTX29 GT30/GTX30 GT35/GTX35
Stainless Steel Discharge Flange, CNC machined, for GT25R/GT28R/28RS and GT3071RWG WIDE VERSION
Stainless Steel Gasket - Garrett T3 Flanged, 5 bolt "GT", & Internally Gated Turbine Housing
Stainless Steel Gasket - Ultimate Internal Wastegate Module
Stainless Steel Lower Downpipe Flange
Stainless Steel T3 Inlet Weld Flange
Stainless V-Band Flange, Turbine Outlet (for Downpipe) on Fiat Abarth GT1446
Standard 3" V-Band (3.75" Flange OD) to 4" Pipe - Machined Transition Piece (Stainless Steel)
Standard T04E Frame Compressor housing for housing for GTX3071R w/4" inlet Cast-In Anti-Surge
STD Threaded Rod End for wastegate actuator - 1/4-28 threads, Length 44mm - End To Center of Eyelet
Steel - 5 Bolt T3 Discharge External WG - Weld On
Steel - T3 5 bolt Discharge External WG - Weld On 3" JS Series
STEEL Banjo Fitting Kit - 14mm With -6 AN Male Flare
